Wood for walls could be used in new installations on top of whatever material is currently on the wall. This is possible because wood paneling is extremely thin. Usually under ¼ inch thick and needs only minor adjustment for outlet and trims if done properly. This is a great way to cover large areas quickly as each panel is rather big. Wood paneling are lightweight enough for a person to handle with ease.
Sizes:
All wood paneling comes in about 4 by 8 foot sheets. The bead-board and some kinds of wood paneling are usually make of thin lumber. These are usually between 3 per 7 feet in width with an average thickness of 3/8 inches. Standard sheets of paneling could vary from approximately 1/8 inch in thickness to 3/8 inch for highest quality of veneer. Wood wall paneling may come in a wide variety of lengths and sizes. Most usual for tongue, groove and shiplap may be a random length as structure of grooves allows for tight joins. The batten and board usually comes in 8 foot length as the application to the wall is frequently vertical. The tongue, groove and shiplap could be put on the walls in either vertical or horizontal fashion.
Types:
Many wood paneling are similar and varying only in type and quality of wood. Durable veneer sheets are very thin and cover up lower quality sheet of wood, which serves as the base. Another option is to use paper skin on the low quality base. Other types are make from extremely thin durable strips of lumber, commonly about 3 per 6 feet wide. This strip is fitted with groove and tongue edges in order to fit. It is the most costly type available because it is solid wood rather than the plywood.
Factors to Consider:
Wood paneling must not use in several environments because of humidity and other ecological factors. It must not be used in the bathroom as wood is quite absorbent. Wood wall paneling comes in several styles, species and could finish in variety of ways, paint or natural. The application to the wall could also achieve by a large number of methods, groove and tongue, shiplap, reverse board and batten and board and batten. boiserie legno potrebbe anche rafforzare la struttura a tempeste e forti venti.
funzioni:
Nonostante di materiali e stili diversi, la boiserie in legno inizia alle segherie ed è cur in grandi forni di essiccazione. da forni, il consiglio del legno dei pannelli sono progettate per spessore e fatto per la larghezza destra. Tutto il dimensionamento della larghezza, la scheda è poi bordo per soddisfare il tipo di rivestimento, a mettere sul muro.
Caratteristiche:
Alcune specie possono essere applicati alle case, che può avere un problema parassiti come legni diversi sono resistenti agli insetti. Il cipresso e la Pasqua cedro rosso sono le due varietà di legno sia Rot resistente e fornisce deterrente per gli insetti infestazione.