Wood for walls could be used in new installations on top of whatever material is currently on the wall. This is possible because wood paneling is extremely thin. Usually under ¼ inch thick and needs only minor adjustment for outlet and trims if done properly. This is a great way to cover large areas quickly as each panel is rather big. Wood paneling are lightweight enough for a person to handle with ease.
Sizes:
All wood paneling comes in about 4 by 8 foot sheets. The bead-board and some kinds of wood paneling are usually make of thin lumber. These are usually between 3 -e 7 feet in width with an average thickness of 3/8 inç. Standard sheets of paneling could vary from approximately 1/8 inch in thickness to 3/8 inch for highest quality of veneer. Wood wall paneling may come in a wide variety of lengths and sizes. Most usual for tongue, groove and shiplap may be a random length as structure of grooves allows for tight joins. The batten and board usually comes in 8 foot length as the application to the wall is frequently vertical. The tongue, yiv ve shiplap ya dikey ya da yatay bir şekilde duvar koymak olabilir.
Türleri:
Birçok ahşap paneller sadece tipine ve ahşabın kalitesi benzer ve farklı olan. Dayanıklı kaplama levhalar çok ince ve ağaç daha düşük kalitede levha örtbas, bu taban olarak işlev gören. Başka bir seçenek, düşük kaliteli baz kağıt cilt kullanmaktır. Diğer tür kereste son derece ince, dayanıklı şeritlerden yapmak vardır, yaygın yaklaşık 3 -e 6 geniş ayaklar. Bu şerit, bir uyumunun sağlanması amacıyla oluk ve dil kenarları ile donatılmıştır. It is the most costly type available because it is solid wood rather than the plywood.
Factors to Consider:
Wood paneling must not use in several environments because of humidity and other ecological factors. It must not be used in the bathroom as wood is quite absorbent. Wood wall paneling comes in several styles, species and could finish in variety of ways, paint or natural. The application to the wall could also achieve by a large number of methods, groove and tongue, shiplap, reverse board and batten and board and batten. Wood wall paneling could also strengthen the structure to storms and high winds.
Functions:
Despite of different materials and styles, the wood wall paneling starts at sawmill and is cur in large drying kilns. From kilns, the board of wood all paneling are planned to thickness and done to the right width. Throughout the sizing of width, the board is then edge to suit type of paneling, to put on wall.
Features:
Certain species may be applied to homes, which may have pest problem as several woods are resistant to insects. The Cypress and Easter Red Cedar are the two wood varieties both rot resistant and provides deterrent to insects infestation.